P2P | 2020年9月13日| 833兆字节采样了三个通常用于混音/母带的相同模型的卷到卷磁带甲板，以供在星云中使用
。产生的四个磁带程序通常很细微，但可以驱动以获得更明显的谐波和音调。还有6个混响程序是从我的其他混响库中获得的，然后使用其中两个卡座将其打印到磁带上或从磁带上退下来。这些混响为您提供了一些可以混合使用的工具，可以使收藏更加完美。
库中的内容是：
Ax 102（甲板1号）– 2轨½英寸，带ARIA电子产品，Flux Magnetics标准响应头，运行ATR Magnetics磁带，采样率为15IPS，30IPS，没有磁带（这是3个独立程序）。
轴102（甲板2号）–运行911的2磁道¼英寸磁带，采样率为15IPS，无磁带（两个程序）。
Ax 102（3号甲板）–运行SM900磁带的2条轨道½英寸，以30IPS采样，没有磁带（还有两个程序）。
从这些平台中总共采样了七个程序（总共四个磁带和三个“直通”程序）。
我还从每个磁带采样中制作了“ EQ平坦化”程序，在这些程序中，我使用了线性相位均衡器来提供更平坦的频率响应，您可能会发现它更适合在您需要更高透明度的情况下使用（例如精通）。这些程序甚至比主要程序更微妙，但是它们仍然具有相同的谐波含量。
甲板＃1被驱动得足够热，以提供一定的压缩/饱和度（甲板2和3没有）。由于星云的工作方式错综复杂，我发现最好将压缩格式与卡座1程序分离为一个单独的程序。该程序仅提供磁带压缩本身（否则是100％透明的），并且如果要驱动它们进行压缩，可以与磁带程序结合使用以提供更完整的模型。它本身也可以用作通用限制器。
最后，有6个额外的混响程序，它们是通过我的其他库中的混响选择“重采样”而制成的，这些混响程序以15IPS（仅使用卡座1和3）在这些磁带机上上/下。这些混响包括我的平板混响中的2个和我各种春季混响中的4个（包括我的CX20中的一个）。它们没有像自己的发行版中的许多混响那样采样可调节的阻尼器控件，但它们仍然非常有用，并且衰减范围和音调范围很广。这些听起来确实与这些混响的标准版本不同，但相似。
总共有18个程序，并且所有程序都提供44.1、48、88.2和96khz采样率（购买时将获得全部4个采样率）。
该库带有Max Ponomaryov（又名azzimov）的出色自定义外观！（您可能想在这里考虑为他的顾客做贡献，以帮助他继续做星云皮肤，或者在这里在Facebook上查看他）。N3和N4都有皮肤，您可以通过按下皮肤上的按钮在不同的程序之间进行切换。我的N3皮肤已经具有这种功能很多年了，但是Max发现它也可以与N4一起使用，这真的很酷！
P2P | 13 September 2020 | 833 MB
Three reel to reel tape decks of the same model, typically used for mixdowns/masters, were sampled for use in Nebula. The resulting four tape programs are usually subtle but can be driven for more noticeable harmonics and tone. There are also 6 reverb programs which were sourced from my other reverb libraries, then printed onto and back off of tape with two of these decks. These reverbs give you some tools for mixing use, rounding out the collection.
Here’s what’s in the library:
Ax 102 (deck #1) – 2 track ½” with ARIA Electronics, Flux Magnetics standard response heads, running ATR Magnetics tape, sampled at 15IPS, 30IPS, and with no tape (that’s 3 separate programs).
Ax 102 (deck #2) – 2 track ¼” running SM911 tape, sampled at 15IPS and with no tape (two programs).
Ax 102 (deck #3) – 2 track ½” running SM900 tape, sampled at 30IPS and with no tape (two more programs).
That’s seven programs altogether that were sampled from these decks (a total of four tape, and three ‘pass-through’ programs).
There are also ‘EQ flattened’ programs I made from each of the tape samplings, where I used a linear phase equalizer to provide a flatter frequency response, which you may find more suitable for use in some cases where you’d like more transparency (for example, mastering). These programs are even more subtle than the main ones, but they still have the same harmonic content.
Deck #1 was driven hot enough to provide some compression/saturation (decks 2 and 3 were not). Because of the intricacies with how Nebula works, I found it better to separate the compression aspect from the deck 1 programs, into a separate program. This program only provides the tape compression itself (and is otherwise 100% transparent) and can be coupled with the tape programs to give a more complete model if you want to drive them into compression. It can also be used by itself as a general purpose limiter.
Lastly, there are 6 bonus reverb programs which I made by ‘resampling’ a selection of reverbs from my other libraries, onto and off of these tape machines at 15IPS (only decks 1 and 3 were used). These reverbs include 2 from my plate releases and 4 from my various spring reverb releases (including one from my CX20). They don’t have sampled adjustable dampener controls like many of those reverbs have in their own releases, but they are still very usable and there’s a range of decay lengths and tones. These do sound different, yet similar, to the standard versions of those reverbs.
Altogether there are 18 programs, and all of them are available in 44.1, 48, 88.2, and 96khz sample rates (you get all 4 sample rates when purchasing).
This library comes with excellent custom skins by Max Ponomaryov, aka azzimov! (You might want to consider contributing to his patreon here to help him continue doing Nebula skins, or check him out on facebook here). There are skins for both N3 and N4 which allow you to switch between the different programs by pushing buttons on the skin. My N3 skins have had this type of feature for years now, but Max found out that it can work with N4 also, which is really cool!
home page:https://cupwise.com/fx/shop/cupreels-1-ax102/?v=0a10a0b3e53b
转载请注明：Audioba-音频吧编曲混音资源网 » Cupwise FX CupReels Ax102 [Nebula]