WiN：R2R小组| 2020年9月19日| 17 MB
MAC：R2R小组| 2019年2月6日| 16.8兆字节
Trackspacer通过将主轨道所需的频率实时地雕刻到另一个轨道中来创建混合空间。与侧链压缩器相似，但功能和透明性高出一千倍。许多艺术家，制作人和工程师都将它视为秘密的混音武器。
秘密混合武器
Trackspacer具有一个32频段的均衡器，可对输入的侧链信号做出反应。它分析了侧链的光谱，并将反向的EQ曲线应用于另一条轨道。这样，您可以通过将实时所需的确切频率实时剪切到另一个轨道来为该轨道创建空间。
进阶面板
在2.0版中，该插件通过引入新功能进行了改进，以实现更好的声音控制。现在介绍M / S或L / R模式时，您只能将效果应用于中间通道，侧面或中间的任何东西。现在，通过攻击和释放控件，您可以设置Trackspacer对输入信号的反应方式以及如何处理输入信号，使其像常规压缩器一样更加平滑或更有力。
关于侧链
音频处理器对输入信号做出反应并产生输出信号。该输入信号可以是直接的或外部的，外部也称为“侧链”。使用侧链压缩器（特别是在EDM中）通常会根据另一个音频轨道的电平来回避轨道（即泵浦效果），这很常见。
TRACKSPACER VS压缩
压缩器对音频信号的幅度/音量/电平做出反应。根据源信号的响度，它们或多或少地施加压缩。多频带压缩器将信号分为不同的频带，并在每个频带上应用不同的设置，但是检测仍然与常规的相同。
Trackspacer将源信号分成32个频段，并分别进行分析。然后，它反转结果，并应用32频段EQ来掩盖信号源所需的完全相同的频率……并实时！这就是为什么它比常规压缩器更好，透明和易于使用的原因，而这一切都与检测有关。
版本2.5.7-16/07/2020-
修复：逻辑10.5崩溃。
-改进：总体优化。
DIRFIX：Wavesfactory.Trackspacer.v2.5.5.Incl.Patched.and.Keygen-R2R
WiN: Team R2R | 19 September 2020 | 17 MB
MAC: Team R2R | 06 February 2019 | 16.8 MB
Trackspacer creates space in a mix by carving the frequencies that the main track needs into another track in real time. Similar to a sidechain compressor, but a thousand times more powerful and transparent. It’s considered a secret mixing weapon by many artists, producers and engineers.
SECRET MIXING WEAPON
Trackspacer features a 32 band EQ that reacts to the incoming sidechain signal. It analyses the spectrum of the sidechain and applies a reversed EQ curve to another track. That way you are creating space for a certain track by cutting the exact frequencies that it needs in realtime to another track.
ADVANCED PANEL
With version 2.0 the plugin was improved by introducing new functionalities for better sound control. Introducing M/S or L/R modes now you can apply the effect only to the mid channel, the sides or anything in between. With the attack and release controls now you can set how Trackspacer reacts to the incoming signal and how it processes it, making it smoother or punchier like a regular compressor.
ABOUT SIDECHAIN
Audio processors react to an input signal and produce an output one. This input signal can be the direct or external, the external is also called “side-chain”. It is very common to use a sidechain compressor, specially in EDM, to duck a track based on the level of another audio track (i.e. pumping effect).
TRACKSPACER VS COMPRESSION
Compressors react to the amplitude / volume / level of the audio signal. Based on how loud the source signal is, they apply more or less compression. Multiband compressors split the signal in different bands and apply different settings on each band, but the detection is still the same as regular ones.
Trackspacer splits the source signal in 32 bands and analyses them individually. Then, it reverses the result and applies a 32 band EQ to duck exactly the same frequencies that the source needs… and in real time! That’s why it’s much better, transparent and easy to use than regular compressors, it’s all about detection.
转载请注明：Audioba-音频吧编曲混音资源网 » Wavesfactory TrackSpacer v2.5.5 / v2.5.7 [WiN, MacOSX]