R2R团队| 2021年1月20日| 5.8兆字节
AVA Bass Flow是用于混合低音的通道条插件。它包含4个可路由处理元素和一个具有输入，输出和路由控制的主控部分。
包括的元素包括：
低音特征：独特的2频段均衡器，可跟踪低音音符的音高并允许在乐器频谱内增强或减少谐波。
频谱低音压缩器：一种频谱压缩器，在整个低音频率范围内具有6个压缩带。
均衡器：一个直观的5频段均衡器，基于Harrison的LegacyQ插件，具有2个滤波器频段和各种曲线形状。
合唱：一种创意效果，可用于增强效果或为低音信号增加额外的运动。
低音角色
低音字符是一个独特的均衡器，它跟随所演奏音符的音高，使您可以增强或减少每个音符中的和声，从而改变低音的实际特征。
频谱低音压缩器
频谱低音压缩器是专为低音设计的多频段压缩器。它允许在集中在低音音符主要驻留的频谱的低端的6个频段上有选择地应用压缩。
均衡器
均衡器模块由一个5频段均衡器和2个附加滤波器频段，一个输出微调控件和一个可选的RTA显示屏组成。每个频段都有可调节的“频率”，“增益”，“形状”和“ Q”参数，以及用于切入或切出的选项。您可以直接在EQ图表上或通过图表下方的相应控件来控制频段。
合唱
合唱是一种效果，可用于增强整体感并为低音信号增加额外的运动。它具有“ Detune”和“ Delay”控件，用于拨入效果；以及“ Mix”控件，用于将其与干音信号混合。合唱效果增加了2个音高变化的声音：一个在输入信号上方，另一个在输入信号下方。
主控
插件窗口右下角的“主控制”部分包含用于切换输入极性，调整输入和输出调整以及设置元素之间布线顺序的控件。
您可以通过单击工艺路线并将其拖动到新位置来更改工艺路线顺序。箭头表示从上到下的信号流向。
路由项目右侧的“耳朵”图标按钮指示路由器侦听点。通过这些按钮，您可以通过绕过路由顺序中选定点的所有模块自动绕过所有信号，从而监听信号链中的特定位置。
“主控制”部分底部的“独奏/监听”按钮可清除任何活动的“路由侦听”点以及独奏的任何模块。指示灯将亮起，以指示任何当前处于活动状态的时间。
Team R2R | 20 January 2021 | 5.8 MB
AVA Bass Flow is a channel strip plug-in designed for mixing bass. It contains 4 routable processing elements and a master section with input, output, and routing controls.
The elements included are:
Bass Character: A unique 2-band EQ that tracks the pitch of bass notes and allows for boosting or cutting the harmonics within the instrument’s frequency spectrum.
Spectral Bass Compressor: A spectral compressor with 6 bands of compression fixed across the bass frequency range.
Equalizer: An intuitive 5-band EQ, based on Harrison’s LegacyQ plugin, with 2 filter bands and a wide variety of curve shapes.
Chorus: A creative effect that can be used to boost presence or to add extra motion to a bass signal.
Bass Character
The Bass Character is a unique EQ that follows the pitch of the note being played, allowing you to boost or cut the harmonics within each note and thus alter the actual character of the bass sound.
Spectral Bass Compressor
The Spectral Bass Compressor is a multiband compressor designed especially for bass. It allows for applying compression selectively across 6 frequency bands focused in the lower end of the spectrum where bass notes mainly reside.
Equalizer
The Equalizer module consists of a 5-band EQ with 2 additional filter bands, an Output Trim control, and an optional RTA display. Each band has adjustable Frequency, Gain, Shape, and Q parameters as well as the option to toggle in or out. You can control the bands directly on the EQ Graph or with their corresponding controls below the graph.
Chorus
The Chorus is an effect that can be used to boost overall presence and add extra motion to your bass signal. It has Detune and Delay controls for dialing in the effect and a Mix control for blending it with the dry signal. The Chorus effect adds 2 pitch-shifted voices: one above and one below the input signal.
Master Controls
The Master Control section at the bottom-right corner of the plug-in window contains controls for switching input polarity, adjusting input & output trim, and setting the order of routing between elements.
You can change the routing order by clicking and dragging a routing item to a new position. The arrows show the direction of signal flow from top to bottom.
The “ear” icon buttons to the right of the routing items indicate Router Listen points. These buttons allow you to listen at specific positions along the signal chain by automatically bypassing all modules past the selected point in the routing order.
The Solo/Listen Clear button at the bottom of the Master Control section clears any active Routing Listen point as well as any modules that are soloed. It will light up to indicate whenever either of these are currently active.
home page:https://harrisonconsoles.com/ava-plugins/
转载请注明：Audioba-音频吧编曲混音资源网 » Harrison AVA Bass Flow v1.0.0 [WiN]